Over the past two years, we have been testing different steel alloys and surface finishing technologies in our technical laboratory to develop the pole with a chrome surface that is safer to use. We developed an entirely new tube material and innovations for the product that is now 100% nickel allergy-free, has a sustainable finish, is 100% free of chipping and flaking, and has an incredible grip. Only Lupit Pole exclusively offers this revolutionary product.
Spin-Static, multi-piece, removable, portable dance pole.
The chrome finish LP is more grippy, making it a very good choice for beginners or people with slippery hands, as it is more forgiving of weaker grips.
The pole is designed to be assembled by a single person in just a few minutes without drilling. The high-quality surface, the unique flex system of the upper disc, and the NEW Safety Block groove ensure quick installation and maximum safety for the dancer.
- Removable, multi-piece dance pole
- Spinning and static mode
- Quick installation without drilling
- Smooth and unique tube joint system
- Upper disc flex system absorbs bending force and distributes it evenly
- Smooth pole design all along the line
- The basic set is suitable for ceilings from 2300mm/7'6.55'' to 2800mm/9'2.24''
- The basic set + a 500mm extension can also be used for slabs up to 3300mm/ 10'9.92''
- Quadruple ball bearing system for topspin
- Safety block nut blocks the pole against loosening
- Chrome finishing
- EU origin
- BETTER SPIN, as a consequence of improved joint system and upgraded bearing systems.
- INCREASED STABILITY: fewer extensions for the same height & increased max. height to 3300mm/ 10'9.92''
- EASIER INSTALLATION & SAFER THREAD LOCK: changed technology for thread block, without impractical and large key tools, and hard tightening of the locking nuts.
- SMOOTHER DESIGN: the cover fits the lower part - no more gap, and the cover does not get unscrewed during the exercise.
|1200mm / 3'11.25''
|230mm / 9.06''
|150mm / 5.91''
|15.7kg / 34.61lbs
|delivery time/ working days
|All EU countries (except Malta, and Cyprus)
|All Europe countries with Malta, Cyprus (except EU countries)
|USA, all states except Puerto Rico, Hawaii, Alaska
|Alaska, Hawaii, Puerto Rico
|Rest of the world
|Australia, New Zealand
|Australia New Zealand Parcel
Frequently asked questions
Lupit home poles have all the tools included except the water level and ladder.
Lupit Stage has all the tools needed to be included in the package to install the studio poles, you would need some common tools like an electric or cordless drill, screwdriver, water-level, ladder. The screws, allen key, and plastic inserts for the concrete are included in the package.
The cover itself is there to cover the tension system of the pole and by default, it is a not usable area of the pole. It is only meant to be a protective shield to prevent a performer from getting in contact with the mechanical elements used to extend the pole and secure it against unscrewing.
The mask is used to cover and protect the thread and fixing elements of the bottom of the pole. It is not meant to be used for gripping and making turns on it since it can get loosen. However, you can hold it or touch it with other parts of the body. Pressing on the cover might cause damage to the cover’s thread and make it hard to screw/unscrew at installation.
The new LP Classic G2 has been designed to maximize safety and pleasure when dancing. One of the changes is that we made the gap between the pole and the mask as thin as possible. Due to this fact, the installation of the pole must be perfect. If the pole is secured/tightened a little more on one side (the 2 small hex screws on the safety nut) the pole might slightly bend and the mask would be difficult to rise.
Please try to relax the pole as much as possible and try to screw the mask up to the end. If that is working that means the thread on the mask is OK.
So If this works, lower the mask again and tighten the pole normally but secure those two small hex screws slowly and simultaneously. That will assure the thread is squeezed equally from both sides and assure the narrowness of the pole through the thread. Now the mask should be enabled to be raised till the end. A drop of machine oil on the inside thread of the mask will help a lot.
Lupit portable home poles can be installed in minutes depends on how skilled is the person. I would say that the average person can do the first installation in 15 min. The next time it will take only 5 minutes.
Lupit studio removable or permanent poles are usually installed by a skilled person. We would say that on average, a person can do first pole installation in 20 min but usually, there is more than one so the next pole can be installed in 10-15 min. It all depends on the ceiling, flooring material, and construction.
Lupit Stage can be installed in 10-15 minutes depends on how skilled is the person. I would say that the average person can do the first installation in 25 min. The next time only 10-15 minutes.
Usually, the pole is just overtightened. Follow the instructions and tighten the pole by hand. Then hold the pole A while you secure the bottom nut of the pole against the top nut with the wrench. So, first, tighten the pole and tighten part A just enough to secure the pole, and then tighten the lower nut very tight against the upper nut. First, you need to hold the top tube of part A by hand and tighten the "bottom nut" with the tool, and then in the last phase use the second tool to hold the top nut.
The rod should now be stable and secure.
If the pole is not vertical, it is possible that the force on a bearing system is not evenly distributed, which can create additional resistance. To bring the mast to a vertical position, use a water leveller.
The bearings are dirty or dry. You must lubricate the lower bearing system and the upper bearing every 3 months with daily use. Machine oil or grease for the bearings in a spray can is the best way to lubricate. Follow the video instruction here.
Yes, you can:
The standard pole setup included in the package is for ceiling heights between 2300 mm and 2800 mm.
To go higher than 2800 mm you need to purchase a 500 mm extension.
To go lower than 2300 mm you need to purchase extensions according to this table: In your case, you need to purchase two 500 mm extensions.
"La barra ha llegado en óptimas condiciones. Fácil de montar.
Por ahora un poco resbaladiza... Pero es cuestión de ir usándola.
Great !! Lupit pole is the best! Super grip!! Quality and service!!! Thanks lupit pole!!
I purchased the Classic G2 chrome in 45mm in the beginning of this year. The sales team was amazing, Alexandra was my point of contact. She helped me select the correct size and amount of extensions as well as a sloped ceiling mount for my home pole installation. Her customer service was above 5 star and she even went above and beyond by helping to provide me with a discount on the products and shipping since the weight of the order would have made shipping very very expensive for me.The pole went together very easily with the only tools I needed being a level and the allen wrenches they provide. The pole is very sturdy and this chrome has a better feel than any of the other chrome poles I've tried. The static mode is very secure, stable, and strong. I don't worry at all about throwing my weight at it. The spin mode is amazing and the new spin technology is truly out of this world. I've never experienced a smoother spin before. Overall an amazing product!