New

Lupit permanent studio champion pole, one piece, truss mount, brass, 45mm

One-piece High-tech pole

This pole is a non-removable pole manufactured to the highest standards in the pole industry.
For professional use in pole dance studios, gyms, and other places with a ceiling height of more than 4200mm/13'9.35'' (the recommended maximum ceiling height is 4700mm/15'5.04'').
The lower bearing system and the upper bearing system must be securely fastened.
The lower pole storage system is fully compatible with other STUDIO poles and can be ordered with Lupit Pole PRO Lock (quick-lock system) or in a standard configuration.
Two different top mounts are available: truss mount (in case you have a truss structure in your studio).
Ceiling mount (in case you have a classic ceiling in your studio).
The pole has been tested under extreme conditions: safety, materials, and mechanical construction.

Features

  • Spinning and static mode
  • Continuous smooth bar, one-piece pole
  • Upper Disc Flex System absorbs bending force and distributes it evenly
  • Available in 45mm diameter
  • Made to measure for maximum ceiling heights up to 4200mm/13'9.35''
  • Top disc must be fixed to the ceiling and drilled into the floor
  • Brass construction

Latest updates

  • New improved polish - higher grip on all poles
  • New improved joint system
  • New environmental boxes

Package

  • Highly polished 45mm pole with integrated AVFAS™.
  • Lower disc with bearing unit
  • Upper disc with bearing unit
  • Tools and screws for assembly

​Custom products have custom shipping costs. Please write to us at sales@lupitpole.com and claim your custom order.

Frequently asked questions

Mark the correct position of the lower disc and monitor the drifting
Clean the lower disc rubber surface with nitro diluent 900 to refresh the stickiness to the floor If necessary increase the tension to the floor by adding 1-2 extension rings to the bottom part.

Yes, QL Pro is fully compatible and exchangeable with all versions of lower bearing systems used with LP PRO and LP Studio Champion poles.
The replacement takes only a minute.

Depends on coating:
Stainless steel and Chrome poles can be cleaned with a cotton cloth and Nitro diluent 900, or pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Powder-coated parts should be cleaned only with pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Make sure you do not use glass cleaners, especially if they contain the Ammonium Hydroxide Cleaning Agent
Cleaning of the rubber surface on discs is also very important. Use pure alcohol for regular cleaning and nitro diluent 900 for refreshing the surface to be stickier.

We do not recommend LP Classic to be used in the studio on competitions.
This pole is made of many segments and its structure needs more attention and care.
For professional use, we designed LP PRO and LP STUDIO CHAMPION poles which are custom made for different ceiling heights.