One-piece High-tech pole
Lupit Pole Chrome poles are allergy-free and 100% chipping-free. Our technology is different and we do not use nickel as a base layer before the chrome coating, as all other manufacturers do. So Lupit Pole Chrome poles are 100% nickel FREE.
This pole is a non-removable pole that meets the highest standards in the pole industry.
It is suitable for professional use in pole dance studios, gyms, and other places with a ceiling height of more than 4200mm/13'9.35'' (the recommended maximum ceiling height is 4700mm/15'5.04''.
The lower bearing system and the upper bearing system must be securely fastened.
The lower pole storage system is fully compatible with other STUDIO poles and can be ordered with Lupit Pole PRO Lock (quick locking system) or in a standard configuration.
Two different upper mounts are available: Truss mount (in case you have a truss structure in your studio).
Ceiling mount (in case you have a classic ceiling in your studio).
The pole has been tested under extreme conditions: Safety, Materials and Mechanical construction.
- Spinning and static mode
- Continuous smooth bar, one-piece pole
- Upper Disc Flex System absorbs bending force and distributes it evenly
- Available in 45mm diameter
- Made to measure for maximum ceiling heights up to 4200mm/13'9.35''
- The top disc must be fixed to the ceiling and drilled into the floor
- Stainless steel construction
- New improved polish - higher grip on all poles
- New improved joint system
- New environmental boxes
- Highly polished 45mm pole with integrated AVFAS™.
- Lower disc with bearing unit
- Upper disc with bearing unit
- Tools and screws for assembly
Custom products have custom shipping costs. Please write to us at email@example.com and claim your custom order.
Frequently asked questions
Mark the correct position of the lower disc and monitor the drifting
Clean the lower disc rubber surface with nitro diluent 900 to refresh the stickiness to the floor If necessary increase the tension to the floor by adding 1-2 extension rings to the bottom part.
Yes, QL Pro is fully compatible and exchangeable with all versions of lower bearing systems used with LP PRO and LP Studio Champion poles.
The replacement takes only a minute.
Depends on coating:
Stainless steel and Chrome poles can be cleaned with a cotton cloth and Nitro diluent 900, or pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Powder-coated parts should be cleaned only with pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Make sure you do not use glass cleaners, especially if they contain the Ammonium Hydroxide Cleaning Agent
Cleaning of the rubber surface on discs is also very important. Use pure alcohol for regular cleaning and nitro diluent 900 for refreshing the surface to be stickier.
We do not recommend LP Classic to be used in the studio on competitions.
This pole is made of many segments and its structure needs more attention and care.
For professional use, we designed LP PRO and LP STUDIO CHAMPION poles which are custom made for different ceiling heights.