New

Lupit Classic/Diamond G2 extension, stainless steel, 1'7.6", 45mm

LUPIT home pole classic/ diamond extension G2 has to be used with LUPIT  home pole classic G2  or LUPIT home pole classic/diamond G2 when you need to reach ceiling heights from 2800mm to 3300mm.

Important:

Before purchasing, please make sure that you have measured the floor to ceiling height of where you would like to install the pole. This would help you avoid any frustration when coming to install the pole, as you will have the correct extensions (if necessary) to reach your desired height.

Features

  • Stainless steel 
  • High quality
  • Made in the EU

Latest updates

  • New improved polishing - higher grip on all poles
  • New improved Joint system
  • New environmental boxing

Shipping cost

Countries price delivery time/ working days
All EU countries (except Malta, and Cyprus)  19,99€ 1-6 
All Europe countries with Malta, Cyprus (except EU countries) 19,99€ 5-15
Slovenia 9,99€ 1
USA, all states except Puerto Rico, Hawaii, Alaska $34,99 5-10
Alaska, Hawaii, Puerto Rico $49,99 6-10
Canada, Mexico 34,99€/ $44,99 5-10
Rest of the world  44,99€ 5-11
Australia, New Zealand 49,99€ 7-9
Australia New Zealand Parcel 44.99€ 10-15

Frequently asked questions

Lupit portable home poles can be installed in minutes depends on how skilled is the person. I would say that the average person can do the first installation in 15 min. The next time it will take only 5 minutes.
Lupit studio removable or permanent poles are usually installed by a skilled person. We would say that on average, a person can do first pole installation in 20 min but usually, there is more than one so the next pole can be installed in 10-15 min. It all depends on the ceiling, flooring material, and construction.
Lupit Stage can be installed in 10-15 minutes depends on how skilled is the person. I would say that the average person can do the first installation in 25 min. The next time only 10-15 minutes.

Lupit home poles have all the tools included except the water level and ladder.
Lupit Stage has all the tools needed to be included in the package to install the studio poles, you would need some common tools like an electric or cordless drill, screwdriver, water-level, ladder. The screws, allen key, and plastic inserts for the concrete are included in the package.

The cover itself is there to cover the tension system of the pole and by default, it is a not usable area of the pole. It is only meant to be a protective shield to prevent a performer from getting in contact with the mechanical elements used to extend the pole and secure it against unscrewing.

The mask is used to cover and protect the thread and fixing elements of the bottom of the pole. It is not meant to be used for gripping and making turns on it since it can get loosen. However, you can hold it or touch it with other parts of the body. Pressing on the cover might cause damage to the cover’s thread and make it hard to screw/unscrew at installation.

Depends on coating:
Stainless steel and Chrome poles can be cleaned with a cotton cloth and Nitro diluent 900, or pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Powder-coated parts should be cleaned only with pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Make sure you do not use glass cleaners, especially if they contain the Ammonium Hydroxide Cleaning Agent
Cleaning of the rubber surface on discs is also very important. Use pure alcohol for regular cleaning and nitro diluent 900 for refreshing the surface to be stickier.

Usually, the pole is just overtightened. Follow the instructions and tighten the pole by hand. Then hold the pole A while you secure the bottom nut of the pole against the top nut with the wrench. So, first, tighten the pole and tighten part A just enough to secure the pole, and then tighten the lower nut very tight against the upper nut. First, you need to hold the top tube of part A by hand and tighten the "bottom nut" with the tool, and then in the last phase use the second tool to hold the top nut.
The rod should now be stable and secure.
If the pole is not vertical, it is possible that the force on a bearing system is not evenly distributed, which can create additional resistance. To bring the mast to a vertical position, use a water leveller.
The bearings are dirty or dry. You must lubricate the lower bearing system and the upper bearing every 3 months with daily use. Machine oil or grease for the bearings in a spray can is the best way to lubricate. Follow the video instruction here.

Yes, you can:
The standard pole setup included in the package is for ceiling heights between 2300 mm and 2800 mm.
To go higher than 2800 mm you need to purchase a 500 mm extension.
To go lower than 2300 mm you need to purchase extensions according to this table: In your case, you need to purchase two 500 mm extensions.

Frequently bought together

All products
Lupit pole Classic/Diamond carry bag

Lupit pole Classic/Diamond carry bag

Accessories

$69.99
Buy
Lupit pole Classic/Diamond G2 slope ceiling mount

Lupit pole Classic/Diamond G2 slope ceiling mount

Accessories

$129.99
Buy