LUPIT Home pole classic /diamond slope ceiling mount G2 It must be permanently fixed to the ceiling for maximum safety and stability of the pole. Since it is designed to absorb the flexibility of the pole during exercise, the pole will maintain excellent spin performance.
Before purchasing, please make sure that you have measured the floor-to-ceiling height of where you would like to install the pole. This would help you avoid any frustration when coming to install the pole, as you will have the correct extensions (if necessary) to reach your desired height.
LUPIT POLE SLOPE CEILING is made to be used when the ceiling is not parallel to the floor and can be used for any inclination. It must be permanently fixed to the ceiling to provide maximum safety and stability of the pole. Since it absorbs the flexibility of the pole during exercise, the pole will maintain excellent spin performance. Instructions for installation and use. Mark the holes to be drilled in the ceiling.
- Easy to adjust
- High quality
- LUPIT Home pole classic /diamond slope ceiling mount G2 can be only used with LUPIT Home pole classic /diamond G2
- Made in Europe
- New and improved surface finish for better grip.
- New and improved Joint system.
- New environment-friendly packaging.
Mark the holes to be drilled in the ceiling.
Make sure there are no installations (electricity, water lines, gas lines) or other dangerous obstacles.
We recommend that LUPIT POLE SLOPE CEILING MOUNT be installed only on the concrete ceiling. If the ceiling is made of any other material or plaster ceiling wall, construction should be checked by an expert and extra-reinforced if needed.
All four holes must be used for fixing the LUPIT POLE SLOPE CEILING MOUNT.
To calculate the pole assembly, measure the vertical distance from the middle point of the LUPIT POLE SLOPE CEILING MOUNT to the floor. Reduce the distance measured by 50-60mm, and use that reduced measure in the LUPIT POLE height calculator for proper installation.
Use the LUPT POLE CLASSIC/DIAMOND Instructions for use or the Installation video for installation. (see technical description)
Be extra careful at the point of tightening the pole. Make sure the pole is not over-tightened, which can cause damage to the ceiling or can loosen the LUPIT POLE SLOPE CEILING MOUNT.
Before every pole exercise, check the stability of the pole by shaking it hard.
|Length||16cm / 6.30in|
|Width||16 cm / 6.30in|
|Height||10 cm / 3.94in|
|Countries||price||delivery time/ working days|
|All EU countries (except Malta, and Cyprus)||24,99€||1-6|
|All Europe countries with Malta, Cyprus (except EU countries)||34,99€||5-15|
|USA, all states except Puerto Rico, Hawaii, Alaska||$49,99||5-10|
|Alaska, Hawaii, Puerto Rico||$64,99||6-10|
|Canada, Mexico||49,99€/ $59,99||5-10|
|Rest of the world||69,99€||5-11|
|Australia, New Zealand||84,99€||7-9|
|Australia New Zealand Parcel||59.99€||10-15|
Frequently asked questions
Lupit portable home poles can be installed in minutes depends on how skilled is the person. I would say that the average person can do the first installation in 15 min. The next time it will take only 5 minutes.
Lupit studio removable or permanent poles are usually installed by a skilled person. We would say that on average, a person can do first pole installation in 20 min but usually, there is more than one so the next pole can be installed in 10-15 min. It all depends on the ceiling, flooring material, and construction.
Lupit Stage can be installed in 10-15 minutes depends on how skilled is the person. I would say that the average person can do the first installation in 25 min. The next time only 10-15 minutes.
Lupit home poles have all the tools included except the water level and ladder.
Lupit Stage has all the tools needed to be included in the package to install the studio poles, you would need some common tools like an electric or cordless drill, screwdriver, water-level, ladder. The screws, allen key, and plastic inserts for the concrete are included in the package.
The cover itself is there to cover the tension system of the pole and by default, it is a not usable area of the pole. It is only meant to be a protective shield to prevent a performer from getting in contact with the mechanical elements used to extend the pole and secure it against unscrewing.
The mask is used to cover and protect the thread and fixing elements of the bottom of the pole. It is not meant to be used for gripping and making turns on it since it can get loosen. However, you can hold it or touch it with other parts of the body. Pressing on the cover might cause damage to the cover’s thread and make it hard to screw/unscrew at installation.