Lupit removable studio pro pole, two piece, stainless steel, 45mm

This pole is designed for professional use in pole dance studios, fitness centers, and other places where easy and quick setup and takedown is required.
This pole is suitable for any height up to 4200mm/13'9.35''. It is custom-made, with 1 joint, but the feel of the surface is smooth from top to bottom, even though it is made of 2 parts. The pole features Lupit's unique AVFAS™ (Automatic Vertical Force Adjusting System) which has two functions:
First, it allows for quick installation, and second, it automatically distributes vertical force evenly between the upper and lower bearing systems while training on the pole. 
Together with the unique Upper Disk Flex System, it ensures maximum spin performance and safety. 
The pole has been tested under extreme conditions in terms of safety, materials, and mechanical construction. For faster installation, it must be used with LUPIT CART!

When you purchase a pole for your home, your ceiling must meet the following requirements.

  • the construction of the ceiling must be made of concrete or
  • the construction of the ceiling must be additionally reinforced
  • the floor-to-ceiling height can be up to 4200m/13´78¨

Features

  • Spinning and static mode
  • Smooth pole design throughout, two-piece pole
  • AVFAS™ (Automatic Vertical Force Adjustment System).
  • Upper Disc Flex System absorbs bending force and distributes it evenly
  • Available with a diameter of 45 mm
  • Made to measure for maximum ceiling heights up to 4200mm/13'9.35''
  • The upper disc must be fixed to the ceiling, but there is no drilling into the floor
  • Stainless steel construction

Package

  • Highly polished 45mm pole with integrated AVFAS™.
  • Lower disc with bearing unit
  • Upper disc with bearing unit
  • Tools and screws for assembly

​Custom products have custom shipping costs. Please write us at sales@lupitpole.com and claim a custom order. 

Frequently asked questions

For maximum performance and durability, you need to choose LP Studio poles.
If you would like to convert your studio into a Yoga or aerial or fitness in just minutes, we recommend you our LP PRO poles, which are fast installation removable poles.
If you will not remove the poles and you need to have hi-performance studio poles, which are competition poles, we recommend you our LP Studio Champion poles.

Mark the correct position of the lower disc and monitor the drifting
Clean the lower disc rubber surface with nitro diluent 900 to refresh the stickiness to the floor If necessary increase the tension to the floor by adding 1-2 extension rings to the bottom part.

Yes, QL Pro is fully compatible and exchangeable with all versions of lower bearing systems used with LP PRO and LP Studio Champion poles.
The replacement takes only a minute.

Depends on coating:
Stainless steel and Chrome poles can be cleaned with a cotton cloth and Nitro diluent 900, or pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Powder-coated parts should be cleaned only with pure alcohol or water and then wiped with dry cotton or microfibre cloth.
Make sure you do not use glass cleaners, especially if they contain the Ammonium Hydroxide Cleaning Agent
Cleaning of the rubber surface on discs is also very important. Use pure alcohol for regular cleaning and nitro diluent 900 for refreshing the surface to be stickier.

LP PRO is also a pressure pole and it was designed for studios to have a possibility to install and take away poles in just a few seconds. This system works on most of the floor-ceiling combinations.
The pole must be in a straight vertical position. The water level should be used.
Remeasure the ceiling height and check if the pole has been ordered according to this height. If the ceiling is too high extra extension ring should be added on a lower bearing to extend the pole. Sufficient pressure must be applied between the ceiling and the floor.
When the pole is just shaken with hands without applying bodyweight, normally, it can be moved.

When doing the turns the body weight adds to the spring load and weight of the pole, all that represents the downforce which increases the friction between the floor and rubber on the lower disc.
It is important to clean the rubber surface and the floor regularly using cleaning pure alcohol. If that will not help, we will send you 3d stickers which are used for marking the position of the pole and sometimes to prevent movement if the floor is slippery.
If the poles are still moving after doing all this, then we recommend using our permanent mount solution.

Frequently bought together

All products
Lupit Studio Pro cart

Lupit Studio Pro cart

Studio Accessories

$279.99
Buy
Lupit Studio Pro slope ceiling mount

Lupit Studio Pro slope ceiling mount

Studio Accessories

$179.99
Buy
Lupit Studio Pro wall hanger, 12 poles

Lupit Studio Pro wall hanger, 12 poles

Studio Accessories

$349.99
Buy